Model | Diameter (m) | Initial pressure (KPa) | Rated working pressure, Pe (KPa) | A deformation rate of 70%, internal pressure equivalent to the rated pressure value of Pe, the airbag bearing capacity of the length of each meter. (kN/m) | Minimum burst pressure (KPa) |
QP3 | 0.8 | 25 | 130 | 114 | 390 |
1 | 18 | 100 | 110 | 300 | |
1.2 | 15 | 85 | 112 | 260 | |
1.5 | 13 | 70 | 115 | 210 | |
QP4 | 1.8 | 35 | 170 | 149 | 510 |
1 | 25 | 130 | 143 | 390 | |
1.2 | 20 | 110 | 145 | 330 | |
1.5 | 16 | 90 | 148 | 270 | |
1.8 | 14 | 80 | 158 | 240 | |
QP5 | 0.8 | 48 | 210 | 184 | 630 |
1 | 35 | 170 | 186 | 510 | |
1.2 | 28 | 140 | 185 | 420 | |
1.5 | 20 | 110 | 181 | 330 | |
1.8 | 16 | 90 | 178 | 270 | |
QP6 | 1 | 45 | 200 | 219 | 600 |
1.2 | 32 | 165 | 217 | 490 | |
1.5 | 25 | 130 | 215 | 390 | |
1.8 | 20 | 110 | 218 | 330 | |
Note: Rated working pressure: ±5%. Compress deformation: ±2%. |
Effective length (m) | D=1M | D=1.2M | D=1.5M | D=1.8M | D=2M |
5 | 3.93 | 5.65 | 8.84 | 12.72 | 15.71 |
6 | 4.71 | 6.79 | 10.6 | 15.27 | 18.85 |
7 | 5.5 | 7.92 | 12.37 | 17.81 | 21.99 |
8 | 6.28 | 9.05 | 14.14 | 20.36 | 25.13 |
9 | 7.07 | 10.18 | 15.9 | 22.9 | 28.27 |
10 | 7.85 | 11.31 | 17.67 | 25.45 | 31.42 |
11 | 8.64 | 12.44 | 19.44 | 27.99 | 34.56 |
12 | 9.42 | 13.57 | 21.21 | 30.54 | 37.7 |
13 | 10.21 | 14.7 | 22.97 | 33.08 | 40.84 |
14 | 11 | 15.83 | 24.74 | 35.63 | 43.98 |
15 | 11.78 | 16.96 | 26.51 | 38.17 | 47.12 |
16 | 12.57 | 18.1 | 28.27 | 40.72 | 50.27 |
17 | 13.35 | 19.23 | 30.04 | 43.26 | 53.41 |
18 | 14.14 | 20.36 | 31.81 | 45.8 | 56.55 |
Diameter (m) | Length (m) | Working pressure (Kpa) | Bearing capacity (KN/m) | Length (m) | Diameter (m) | Working pressure (Kpa) | Bearing capacity (KN/m) |
0.8 | 1 | 260 | 229 | 1.5 | 1 | 150 | 247 |
2 | 280 | 246 | 2 | 170 | 280 | ||
3 | 300 | 364 | 3 | 190 | 313 | ||
4 | 320 | 281 | 4 | 210 | 346 | ||
5 | 340 | 299 | 5 | 230 | 379 | ||
6 | 360 | 317 | 6 | 250 | 412 | ||
1 | 1 | 220 | 242 | 1.8 | 1 | 130 | 257 |
2 | 240 | 264 | 2 | 150 | 297 | ||
3 | 260 | 386 | 3 | 170 | 336 | ||
4 | 280 | 308 | 4 | 190 | 376 | ||
5 | 300 | 330 | 5 | 210 | 416 | ||
6 | 320 | 352 | 6 | 230 | 455 | ||
1.2 | 1 | 180 | 238 | 2 | 1 | 110 | 242 |
2 | 200 | 264 | 2 | 130 | 286 | ||
3 | 220 | 290 | 3 | 150 | 330 | ||
4 | 240 | 317 | 4 | 170 | 374 | ||
5 | 260 | 343 | 5 | 190 | 418 | ||
6 | 280 | 369 | 6 | 210 | 426 | ||
Note: When compress deformation is 70%, the inner pressure equals the rated working pressure. |
Specification | performance compression deformation60% | Weight | ||
diameter(mm) | length(mm) | counterforce (KN) | Enery absorption(KJ) | KG |
300 | 500 | 38 | 3 | 6 |
400 | 800 | 46 | 4.8 | 10 |
500 | 1000 | 72 | 26 | 18 |
1000 | 1500 | 188 | 52 | 68 |
1000 | 2000 | 274 | 78 | 98 |
1200 | 2000 | 337 | 98 | 118 |
1500 | 3000 | 624 | 236 | 301 |
2000 | 3500 | 916 | 464 | 589 |
2500 | 4000 | 1680 | 918 | 1020 |
3000 | 6000 | 3368 | 2056 | 2380 |
Initial pressure(Po)is 0.05Mpa | Initial pressure(Po)is 0.05Mpa | |||||
weight(kg) | R(KN) | GEA(KJ) | Height(kg) | R(KN) | GEA(KJ) | |
0.5*1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6*1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7*1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0*1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0*2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2*2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35*2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5*3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7*3.0 | 405 | 639 | 191 | 436 | 860 | 263 |
2.0*3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5*4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5*5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0*5.0 | 1880 | 2104 | 1210 | 2155 | 2709 | 1571 |
3.0*6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3*4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3*6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3*6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |