Not Only Offer Marine Equipment

But Also Provide After Sales Service
​You are here: Home >> Products >> Pollution-Prevention Equipment >> Marine Oil Separator

Marine Oil Separator

Name Model Capacity Discharging Type
Fuel oil separator
Lubricating oil separator   
203CD-23; 1500L/H Manual discharging
203CD-2360
303CD-2360
202DD-21 Max.1500L/H  Part discharging 
204SD-23 2000L/H Fully discharging
 Detailed SPEC for each type pls refer to below information:
KYDR203CD-23 Marine oil separator Supplier
203CD-23 Oil Separator
1)203CD-23,203CD-2360,303CD-2360 Oil Separator                 Inquiry
Application:
This serious Oil separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.  
Characteristic: 
1.The machine has the advantages of high efficiency,low oil consumption,convenient operation and economic maintenance cost.
2.The clear oil and dirty water is let out freely,the sludge is discharged manually.
Discharging type Manual discharging 
Rated capacity L/H 1500L/H
Motor power kW 2.2(380V/50Hz/3P)    (Model 203CD-23)  
2.2(440V/60HZ/3P)    (Model 203CD-23)
2.2(440V/60HZ/3P)
(model:303CD-2360)    (model:303CD-2360)  
N.W. kg 233
Dimension L×W×H      850*593*7630mm 
Dimension of package  L×W×H 1210*1010*1190mm  
Gross weight   kg 383
202DD-21 China Marine Oil separator Supplier
202DD-21 Oil Separator
2) 202DD-21 Oil Separator:                                                            Inquiry
Application:
202DD-21 Marine Oil separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.   
Characteristic: 
1)The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost. 
2)The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.  
3)The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security. 
Main Technical Specification
Main Technical Specification
Discharging type Part discharging
Max capacity L/H 1500L/H
Motor power kW 2.2(380V/50Hz/3P)or others
N.W. kg 238
Dimension  L×W×H 710mm×446mm×845mm
Condition For Mineral Oil Separation And Actual Capacity (refer to the chart)
Oil types Fuel oil Lubrication oil  
fuel oil heavy fuel oil SAE30、40 detergence
 oil
steam 
turbine oil
Kinematical 
viscosity(mm2/s)
1.9-5.5 5.5-24 120 180 100-120 61.2-74.8
40℃ 50℃ 40℃ 40℃
Density/(kg/m3)(20℃) <900 900-991 880-900 <900
Separating 
temperature (℃)
normal temperature、
40-60best
90-98 80-95
Recommended capcity (l/h) 1950 1500 1050-1125 675-750 750-900 375-450 1200-1275
If you have special requirement, Please connect with us.
204SD-23 Fuel Oil & Lubricating Marine oil separator Supplier
204SD-23 Fuel Oil & Lubricating Oil Separator
3)204SD-23 Fuel Oil & Lubricating Oil Separator                        Inquiry
Application:
204SD-23 Oil separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.  
Main Technical Specification
Main Technical Specification
Discharging type Full discharging
Max capacity L/H 2000L/H
Motor power kW 4(380V/50Hz/3P)or others
N.W. kg 470
Dimension L×W×H 865*795*1100mm
Dimension of package L×W×H 1000*9200*1300mm
Gross weight kg 570
Description of supply:
1.Supply scope and documents attached to the machine:
*one set of separator(including motor)
*one set of special tools
*one set of spare parts
*Instruction manual
*Certificate of quality
*Packing list
2.If any customer option,the cost should be paid additionally:
*Oil feed pump
*Operation water tank
*heater
*electric control cabinet
*Unit module
​You are here: Home >> Products >> Pollution-Prevention Equipment >> Marine Oil Separator

Leadong Theme

Skype:deyuanmarine   E-mail: manager@deyuanmarine.com
Tel:+86-756-8301004   Phones/WhatsApp:  +86-133 266 33 115   Fax:  +86-756-
7231824    
Address:
Room 1601, No.1 Jinwan Road, Jinwan District, Zhuhai City China
Copyright© 2020,Deyuan Marine Co.,Ltd All Resolved Site Map   Hot Links